Which amperage to choose?

The charging capacity of a charger depends on the intensity of the electric current supplied for charging and the charging capacity of the battery. In the motorcycle battery, the charger must provide a low electrical current intensity below the tenth of the battery capacity. To properly control the electrical energy supplied for the charging of the battery, it is important to choose the battery charger correctly according to the intensity of the charge and its characteristics.

You may like : How to enlarge an attic room?

The charging capacity of the battery charger

It is important to start choosing your battery charger according to its charging capacity. The charging capacity depends on the intensity of the electric current it provides for charging. For the car, the charger must provide a very high intensity to charge the battery while for a motorcycle battery the current supplied for charging must be of low intensity. The choice of your battery charger and the charging intensity depends on the battery you want to charge. Car batteries require a large charging capacity at the charger, while motorcycle batteries require a small charging capacity. The charging capacity of the battery charger must be adapted to the charging capacity of the battery. Each charger has its voltage so it must also be taken into account in order to choose the right intensity to charge a battery.

To see: https://www.youtube.com/watch?v=PJAbd1VDyKY

Others readers like : How to lay a blackout wire mesh?

Choose the charge intensity

The choice of the right charging intensity depends on the motorcycle battery you want to charge. When the charger is plugged into the battery, the charge of the supplied electric current is in volt. Volt is the unit of measurement of the potential difference between two points of a conductor carrying a current of one ampere. It is important to consult the charger manual to check if the charging intensity of the charger is suitable for charging your battery. In it it is necessary to look for information about the voltage of the battery charger. To charge a car battery, you need a voltage below 12 Volts. For the motorcycle, it is necessary to choose a charge capacity at 10% of that of the battery. Choose the charger that matches the charging capacity of your battery.

Read also: My test of the Tmezon videophone

Monitoring the load intensity

Monitoring is required to properly charge your battery. For the motorcycle, it is necessary check that the charging intensity is always at 10th of the battery’s charging capacity, i.e. for a charging capacity of 10 amperes/hour the setting should be at 1 ampere at the battery level. It takes a charge of 10 hours to charge this motorcycle battery. For a motorcycle battery of 20 amperes/hour, it takes a charge of 20 hours. To obtain the charging time, the battery capacity is divided by the charging current. Too fast charging can damage the battery. Avoid charging a motorcycle battery beyond its charging capacity to increase its life and not also damage it.

https://recharger-ses-batteries.com/

RELATED POSTS